| Customization: | Available |
|---|---|
| Warranty: | 2 Years |
| Function: | Pre Milling, Gluing, Edge Banding, End Trimming, Rough Trimming, Fine Trimming, Contour Tracking, Scraping, Buffing, Slotting |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Width of board
|
Min. 50mm
|
End trimming motor
|
0.5kw*2
|
|
Length of board
|
Min. 100mm
|
Rough trimming motor
|
0.75kw*2
|
|
Thickness of board
|
10-60mm
|
Fine trimming motor
|
0.75kw*2
|
|
Width of banding
|
12-65mm
|
Corner rounding motor
|
0.5kw*2
|
|
Thickness of banding
|
0.4-3mm
|
Polishing motor
|
0.37kw*2
|
|
Heating power
|
1.5kw
|
Feeding speed
|
10-23m/min
|
|
Feeding motor power
|
2.2kw
|
Air pressure
|
0.8Mpa
|
|
Pre-milling moter
|
1.5kw*1
|
Shape of workpiece
|
straight
|
|
Glue spreading motor
|
0.37kw
|
N.W.
|
2000kg
|
|
Voltage
|
380v, 3ph, 50hz
|
Size
|
6300×850×1520mm
|
|
Pre-milling
The pre-milling system corrects the plate-type workpiece before pressing the film. The pre-milling device uses double milling cutters to modify the ripple marks caused by the cutting board saw processing to achieve a better edge banding effect.
|
|
Gluing
The glue pot adopts imported special ball bearing and high hardness and super wear-resistant material glue box, the glue lifting shaft is patented design, CNC processing, to ensure the glue output, uniform daub, the glue surface hit 99.999%, the glue thickness can be controlled at will.
|
|
End trimming
The end trimming system is used to cut off the cutting components of the front and rear edge tape. The end trimming device moves through precise linear guides, adopts automatic profiling and high-frequency electrode rapid cutting mechanisms to ensure that the cut surface is flat and smooth.
|
|
Rough&Fine trimming
Rough and fine trimming devices are used for trimming and processing the excess edge banding material on the upper and lower parts of the sheet edge banding. It adopts the structure of automatic profiling and high-frequency high-speed motor, etc. To ensure the smoothness of the upper and lower parts of the trimmed board edge.
|
|
Scraping
The scrapping is used to eliminate the ripple marks caused by the cutting process of the non-linear motion of the trimming, so that the upper and lower parts of the sapwood are smoother and cleaner, and the edges are scraped. Updated scraping mechanism with bigger unit and big copy wheel and V shape blade to get better effect.
Buffing/Polishing
The buffing component polishes the edge and removes the sol residue on the workpiece. The polishing device uses a cotton polishing
wheel to clean the processed plate. The edge-sealing end surface is smoother through polishing. The polishing component used for the upper surface of the workpiece is fixed on workpiece. |
|
Corner Rounding
Corner rounding mechanism with two high precision tracking motors to ensure high tracking speed and high trimming speed. The profile tracking system component is used to match the sun coated film to the jade star on the workpiece during the transportation process and cut (outline) the edges and corners.It can make the end surface of the table more smooth and beautiful. |
wooden box or other requested packing for Pre-milling corner rounding full automatic edge banding machine price for furniture
(1) Pre-sale services:
* Provide the free consultation of the equipment .
* Provide the standard device and the flow chart.
* According to the clients' special requirement, offering the reasonable plan and free design helping to
select the equipment.
* Welcome to visit our factory.
(2)Services during the sales:
* Inspect the machine before leaving the factory.
* Oversea install and debug the equipment.
* Train the first-line operator.
(3)After sale services:
* 24 hours online service.
* Provide the VIDEO with Install and debug the equipment.
* Provide technical exchanging.
){kind=link}